| Model | FZQ100 | FZQ150 | FZQ200 | FZQ300 | FZQ400 | FZQ600 | FZQ800 | FZQ1000 | FZQ1200 |
| Max.LiftingWeight(T) | 100 | 150 | 200 | 300 | 400 | 600 | 800 | 1000 | 1200 |
| Max.ClampingForce(kn) | 2400 | 360000 | 480000 | 960000 | 960000 | 14400 | 19200 | 25600 | 32000 |
| Max.
WorkingPressure(bar) |
280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 | 280 |
| Applicable
Pile Diameter(m) |
1-2 | 1.5-2.5 | 1.8-3.5 | 2-3.5 | 2.5-3.5 | 2.5-4 | 3-6 | 3-10 | 3-12 |
| Length(mm) | 2000 | 2380 | 2850 | 3150 | 3180 | 4500 | 9200 | 12400 | 14500 |
| Width(mm) | 2000 | 2380 | 2850 | 3020 | 3180 | 4000 | 8300 | 11500 | 13100 |
| Height(mm) | 2400 | 2570 | 2570 | 2570 | 2600 | 2600 | 3400 | 3500 | 4000 |
| Weight (T) | 8 | 10 | 13 | 16 | 25 | 27 | 42 | 75 | 100 |
| ClampQuantity | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 |
Upending Pile Tool
- Weight : 8-100 T
- Max.Lifting Wieght : 100-1200 T
- Max. Clamping Force : 2400-32000 kN
- Max. Working Pressure : 280 bar
- Available clamping scope : 1-12 m
DISCRIPTION
Zhenu FZQ series pile upending tool is specifically designed to upend and lift large diameter piles.
FZQ series pile upending tool is a good partner for piling hammer ,which can lift the piles to piling position in advance, so greatly reduce the frequency of use of the piling hammers and allow the pile hammer to focus on the work of piling. Pile upending tools can improve piling work efficiency by more than 2-3 times, especially for offshore wind power piling projects, there are extreme requirements for efficiency.
TECHNICAL DATA
PROJECTS
